Energizer 715 - Manual (Page 114)

92 Chapter: 6
Step value setup
You can set the step value from 0.1 to 2.0 units (factory setting: 0.1). Set the step to a number that
is convenient to use and easy to multiply.
2 In the EASY BOLUS ENTRY screen, the “step”
value will appear flashing. Change the value
and press
ACT (The step value is the
increment you will use for your Easy bolus.)
3 The screen will return to the BOLUS MENU.
Your step amount is now programmed and
Easy Bolus is ready to use. Exit the menus.
Delivering an Easy bolus
Practice using the Easy Bolus feature while looking at the pump screen as you count the beeps. After
you are familiar with Easy Bolus, you can use the audible tones for bolus delivery without having to look
at the screen.
NOTE - Easy bolus only works from the HOME screen.
4
3
2
1
0 1.0 0.5 1.5 2
Example:
2.0 unit Easy bolus with a step
amount set at 0.5 units
0
Total # Steps = 4
Total # Button Presses = 4
Total # Units
1 Step = 0.5 units
1 Step = 0.5 units
1 Step = 0.5 units
1 Step = 0.5 units
/
(flashing)
EASY BOLUS ENTRY
0. 1 U
ACT
ESC
BOLUS MENU
Easy Bolus
BG Reminder
EASY BOLUS ENTRY
Dual/Square Bolus
0. 5 U