Energizer 715 - Manual (Page 119)

Optimizing pump therapy 97
5 After you press ESC , the BASAL RATE screen
appears. The screen will show:
➠ the current basal pattern and basal rate,
➠ time it started, and
➠ the 24-hour basal total.
Select a pattern
Before you try to select a pattern to be active, make sure the Patterns feature is on. After your
standard pattern and/or pattern A or B are set, do these steps to select a pattern to be the active one:
1 Go to the SELECT PATTERN screen.
Main > Basal > Select Patterns
2 Select the desired pattern, press ACT .
3 The screen will return to the BASAL MENU. Your basal
pattern is now active. Exit the menus.
NOTE - If pattern A or B is active, the pump is in “Special
mode” (an open circle appears at the top of the screen).
indicates
Pattern A is the
active pattern
BASAL RATE A
Current Rate 0.80 U/H
Started #1 - 12:00A
24 Hr. Total 19.20
19.60 U
this pattern is not
programmed
Standard 16.80U
Pattern B - -. - -
Pattern A 19.60U
SELECT PATTERN
ACT BASAL MENU
Set/Edit Temp Basal
Set/Edit Basal
Select Patterns