Energizer 715 - Manual (Page 157)

Troubleshooting 135
Low reservoir alert
You can program the pump to sound an alert when either a specified
number of units remains or a specified amount of time remains before the
reservoir will be empty.
Low battery alert
If you get this alert, DO NOT go to sleep without replacing the battery.
The backlight and the remote and Paradigm Link meter functions are
disabled during a LOW BATTERY condition. If the alert type is set to
“vibrate,” the pump will change to the audio alert “beep-medium.” Clear
(
ESC , ACT ) this alert before you replace your battery.
Alarms
Your pump has a sophisticated network of safety checks and systems. If the safety network detects
anything unusual, your pump notifies you of conditions that require your immediate attention. The
backlight illuminates the pump screen and the alarm/alert message displays on the screen.
NOTE -
The STATUS screen shows any alarms and alerts that are active.
➠ Why are alarms important?
Your pump monitors activities and notifies you if there is an unusual
pump status or your attention is required. When an attention alarm
is active, INSULIN DELIVERY IS STOPPED and immediate operator
interaction is required.
An alarm gradually becomes higher in pitch until you turn it off. If
the vibrate mode is on, all alarms and alerts start as vibrations and
then change to beeps. For your safety, if there is no response after ten
(10) minutes, the beeps change to a siren. The siren continues every
minute until the alarm is cleared.
LOW
RESERVOIR
ESC, ACT to clear
3:36P
LOW
BATTERY
Replace battery now
Use 1 AAA
ESC, ACT to clear
10:09A
when a solid circle appears,
follow the instructions on the
screen.