Energizer 715 - Manual (Page 54)

32 Chapter: 3
BG reminder
When you deliver a bolus you may want to check your blood glucose afterwards. The BG reminder is
an optional feature that you can use to have the pump send you a reminder you to check your blood
glucose after a bolus. You can set the pump to remind you with an audible ‘beep’ or by vibrating. Your
pump is set at the factory with this feature turned off. If the BG reminder feature is turned on when
you are programming your pump, you will be asked to set the amount of time between the bolus insulin
delivery and the reminder. This amount of time is called the ‘BG Reminder Duration.’ The amount of
time you set can be from 30 minutes to 5 hours, or NONE. If you do not want to use the BG Reminder at
all, set the option to off (BG Reminder is not available after an Easy Bolus).
1 Go to the BG REMINDER SETUP screen.
Main > Bolus > BG Reminder
2 Select On and press ACT. The BG reminder feature
is now enabled (turned on). Exit the menus.
Now, the next time you program a bolus, your pump will ask
you for the amount of time after your bolus before you want to
be reminded to check your blood glucose.
NOTE - If you press ESC when the BG Reminder Duration
screen appears, your pump will begin delivering the bolus
without setting a reminder. If you program another bolus with a BG reminder before a previously
scheduled BG reminder goes off, the previous BG reminder will be cancelled.
Your pump will beep or vibrate
and the message “CHECK
BG” will appear on the screen.
Your pump will continue to
beep or vibrate periodically
until you clear the reminder
(
ESC, ACT).
The STATUS screen will show
the amount of time remaining
before the BG reminder
notice will happen. In this
example, the BG reminder
notice will happen in 18
minutes.
BG REMINDER SETUP
Off
On
(flashing)
BG REMINDER DURATION
2:00
12:40P
CHECK
BG
This is a reminder
to check your BG
ESC, ACT to clear
STATUS
BG Reminder in 0:18h
Battery: Normal
Tues 08 MAR 2004 U100