Energizer 715 - Manual (Page 92)

70 Chapter: 5
3 The SET START TIME 2 screen will appear.
5 The screen will return to the EDIT SETTINGS screen. You can now program your BG target(s).
BG (blood glucose) target range
The BG target range setting allows you to set your
blood glucose target range. Because your target may
vary throughout the day, your pump allows you to set
up to eight (8) BG targets each day. If you want to set
just one target value, instead of a range, set both the
low and high values to the same number.
If your current blood glucose level is above your
BG target range, the Bolus Wizard feature will
calculate a correction dose. If your current blood
glucose level is below the BG target range, the Bolus
Wizard feature will calculate a negative correction
and subtract it from your food bolus.
4 To set just one insulin sensitivity: To set more than one insulin sensitivity:
Press ESC . a. Set the start time for
the next insulin
sensitivity and press
ACT .
b. Set the value for the
next insulin sensitivity
and press
ACT .
c. Repeat steps a and b
to set more values.
d. Press ESC when you
are done.
(flashing)
SET START TIME 2
mg/dL
per unit insulin
_ _ _
_: _
(flashing) set, then press ACT
SET START TIME 2*
7:30A
mg/dL
per unit insulin
_ _ _
(flashing) set, then press ACT
* Depending on how many
values you set, this number
can be 2 through 8.
INS SENSITIVITY 2*
7:30A
mg/dL
per unit insulin
50
Correct up to the lower limit
(mg/dL)
70
(mmol/L) 3.8
Correct down to upper limit
(mg/dL)
100
(mmol/L) 5.5
G
lu
c
o
s
e
C
o
n
c
e
n
tr
a
ti
o
n
22.2
13.9
5.5
3.8
(mmol/L)
400
250
100
70
(mg/dL)
Target Range