Energizer 715 - Manual (Page 94)

72 Chapter: 5
Active insulin time
The active insulin time setting lets the pump know which active insulin time to use in calculating the
amount of active insulin to subtract before estimating a bolus. See “About active insulin” on page 64
for more information about this setting.
Your healthcare professional should determine the active insulin time that is best for you. To set the
time, take the following steps:
MESSAGE What it means
➠ “Bolus Wizard setup is complete” ...Bolus Wizard feature is on and all settings are programmed.
➠ “Bolus Wizard is off”...................Bolus Wizard feature is off.
➠ “Missing Info” ...........................Bolus Wizard feature is on, but some of the settings are not
programmed.
This screen will show instructions and the missing
information.
You must program the missing information before you can
use the Bolus Wizard feature.
1 In the EDIT
SETTINGS screen,
select
Active Ins
Time and press
ACT .
2 Set the number of hours for the
active insulin time and press
ACT .
3 The screen will return to
the EDIT SETTINGS screen
where you can see the
new setting.
- - -
->
->
EDIT SETTINGS
Sensitivity
BG Target:
Active Ins Time:
6
(flashing) set, then press
ACT
ACTIVE INS TIME
hr
->
->
EDIT SETTINGS
Sensitivity
BG Target:
Active Ins Time: 6