Edimax Technology IC-1520POE - Manual (Page 9)

5
2.2. Installation Procedure
1. Unpack the Internet Camera package and verify that all the items listed in the
Chapter 1 are provided.
2. Connect the Internet Camera to your network by attached the network cable from
the switch/router to the LAN port of the Internet Camera.
3. Connect the power adapter to the Internet Camera and plug the power adapter to
power outlet. The Internet Camera will be powered on. When the Internet Camera
is ready, the Ready LED will light.
Note: It is highly recommended to use the power adapter shipped with the Internet
Camera, do NOT use any other power adapter from any sources.