Elmo EDR-X216 - Manual (Page 25)

Custom Configuration: Allows you to select a specific date you would like to program your recording to. For example, you may not
want continuous recording on a holiday. On this screen, you can also select the option of having the holiday setting "rotate" or
repeat itself on a weekly, monthly or yearly basis. The default setting is Motion Sensor.
Figure 13. Custom Configuration
'
 '&
 
To set up scheduling, follow these steps:
1. Select a camera to start scheduling the time for recording.
2. Set the Calendar parameters. To set the recording times in Simple mode: weekend, Saturdays, and Sundays/Custom ( the
time/hour settings will remain the same)
a. Camera: Click on the desired camera to enter recording settings
b. Weekday: Set the recording mode for the weekday (C-continuous, S-sensor, M-motion, P- pre-alarm)
c. Saturday: Set the recording mode for Saturday (C-continuous, S-sensor, M-motion, P- Pre-alarm)
d. Sunday/Holiday: Set the recording mode for Sunday and for holiday(s)
3. Set the Record Mode:
a. Continuous: Check for continuous recording. If this function is selected, all other recording settings will be cancelled.
b. Sensor: Check to have sensor-activated recording.
c. Motion: Check to have motion-activated recording.
d. Pre-Alarm: Check to have camera record five seconds before and after motion is detected.
'
 '&
 
17