Elmo EDR-X216 - Manual (Page 28)

4. Select Motion for Emergency
5. Select the Sensor for Emergency
6. Enter the Emergency Phone Number and an Alternate Phone Number .
7. Enter the Transfer Time .
8. Click Save to save your settings.
'
  *
 ) &
 # '
)

To send an alert to another DVR server, follow these steps:
1. Select LAN/PSTN/LEASED CIRCUIT(Router).
2. Select the Bandwidth Throttle.
3. Enter Frequency of Call Out.
4. Select Motion for Emergency.
5. Select the Sensor for Emergency.
6. Enter the Emergency IP Address .
7. Enter an Alternate Phone Number.
8. Enter the Transfer Time .
9. Click Save to save your settings.
'
)
 .
)
)
%
The Server Information tab allows you to set or get information about your server.
20 - ELMO USER MANUAL 2003G