Elmo EDR-X216 - Manual (Page 68)

match with your Server ID on the server software.
Add Group Enables the user to add a Group.
Server Name A descriptive name of your choice.
IP address IP address of the remote server.
Connect When System
Start Check this box to automatically connect to the server when the
remote software loads.
Name The user name that is desired which corresponds to a user name
on the server.
Password This password must match with the password on the remote
server for the user name you've entered above.
Cancel Allows user to cancel creating a new server in the list of servers
to connect to.
Table 4. Insert to New Site Window Features
3. Click the Add Group button to add a Group.
4. Enter the name of the new Group.
5. Click OK to continue.

  '
)

)
)
%
Before connecting to a server, ensure that the server is on, and that it is available on your local network or internet. Also, you
should use the same versions of ELMO DVR Server and ELMO DVR Remote.

   '
)

To connect to a server, follow these steps:
1. Click the Connections button on the main screen. The following window appears:
60 - ELMO USER MANUAL 2003G