EAW JFX100 - Manual

• Compact yet fully outfitted for demanding professional use
• HF compression driver and vented LF for fully professional
performance
• Wave Guide Plate™ optimizes HF pattern for near field
applications
• Asymmetric enclosure provides multiple mounting angles
• Pole mount cup & fly track plus U-bracket & Omnimount®
Series 100 or similar mounting points
• Passive crossover for easy operation and economical
powering
The JFX100 is a 2-way compact multi-purpose loudspeaker. Its
multi-functional design adds considerably to its value as a
full-range loudspeaker. Combining high output and natural
reproduction, it is specifically outfitted to serve in a variety
of both portable and permanent applications. The asymmet-
ric enclosure provides typical angles needed for ceiling and
wall mounting as well as for stage monitor operation. For per-
manent installation, enclosure hardware includes mounting
points for an optional U-bracket, an Omnimount® Series 100
or similar bracket, and fly track for suspension. Provisions for
portable use include a pole mount cup, fly track for rigging,
and a handle integral to the rear of the enclosure that facili-
tates handling and transport. The JFX100 is particularly suit-
able as a nearfield main loudspeaker or as a fill/delay element
in larger systems. Its wide angle projection makes audience
coverage easy. While the JFX100 is well suited as is for many
applications, the addition of a subwoofer expands its capabil-
ities for more demanding applications such as for smaller
houses of worship, theaters, and band PA. Six year warranty.
• Portable systems or permanent installations
• Wall and ceiling mountings
• Low profile appearance
• Main PA reinforcement in small- to
medium-sized spaces
• Downfill for flown clusters
• High SPL under balcony / stage lip / delay fill
• A/V and/or surround sound installations
• Voice & F/X reinforcement in themed attractions
SPECIFICATIONS JFX100
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 [email protected] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. JFX100/0004638/2 pp September 2002 Printed in USA
Part Number 0001751
Configuration 2-way, full-range
Powering Passive LF/HF crossover
LF Subsystem 1x 10-in, vented
HF Subsystem 1x 1-in exit/1.75-in voice coil
neodymium compression driver
on Wave Guide Plate™
Recommended High-Pass
Frequency (24 dB/octave) 70 Hz
Enclosure Materials Exterior grade Baltic birch plywood
Finish Wear resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Hardware Pole mount cup (bottom); 1x 3-
position fly track with integral
3/8”-16 threaded mounting/sus-
pension point (top); 4x 5/16”-
18 threaded mounting points for
Omnimount Series 100 (rear); 1x
pull back ring (rear)
Grille Powder coated perforated steel,
foam backed
Dimensions inches millimeters
Height 19.75 502
Width(front) 11.68 297
Width (rear) 4.94 125
Depth 11.82 300
Weights pounds kilograms
Net Weight 39 17.7
Shipping Weight 43 19.5
Frequency Response (1 W @ 1 m)
±3 dB 90 Hz to 16 kHz
-10 dB 70 Hz
Axial Sensitivity (dB SPL, 1 W @ 1 m)
Full Range 96
Impedance (Ohms)
Full Range 8
Power Handling (Watts, continuous)
Full Range 300
Calculated Maximum Output (dB SPL @ 1 m)
Full Range Peak 127
Full Range Long Term 121
Nominal Coverage Angle / -6 dB points (degrees)
Conical 100
PHYSICAL
FEATURES
DESCRIPTION
APPLICATION
PERFORMANCE