Panasonic NV-GS27EB - Manual (Page 34)

Edit mode
34
LSQT1006
Edit mode
Copying onto a DVD recorder or a
VCR (Dubbing)
Pictures recorded by the movie camera can be
stored on a DVD-RAM or other such media. Refer
to the instructions for the recorder.
≥Place a recorded cassette in the movie
camera, and an unrecorded DVD-RAM or
cassette in the DVD recorder or VCR.
1 Connect the movie camera and the
recorder.
Connecting with the AV cable
≥Connect the movie camera and the recorder
by using the AV cable 1.
≥If your recorder is not equipped with AV Input
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
Connecting with the optional DV cable
(Only for equipment with a DV terminal)
2 Turn on the movie camera and set to Tape
Playback Mode.
3 Select the input channel on the TV set and
recorder.
4 Move the joystick up to select the [ 1/;]
icon to start playback. (Player)
≥The image and sound are reproduced.
5 Start recording. (Recorder)
6 Stop recording. (Recorder)
7 Move the joystick down to select the [ ∫]
icon to stop playback. (Player)
≥For more information, refer to the operating
instructions for your TV set and recorder.
≥When you do not need functional indications or
date and time indication, set [BASIC] >>
[DATE/TIME] >> [OFF] in the Tape Playback
Mode and press the [EXT DISPLAY] button on
the remote control for no indication.
(When you connect the movie camera and a
recorder with the DV cable, these indications
may not appear.)
ª When neither image nor sound from
the movie camera is output to the TV
set
≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. ( -35- )
≥Check the connected terminal.
1
[VIDEO IN]
[AUDIO IN]
A/V
2 (L2) (L2)
S /
DV
LSQT1006ENG.book 34 ページ ２００５年１２月９日 金曜日 午前１１時１７分