Fitting the lens cap, The grip belt – Panasonic NV-GS27EB User Manual

Page 7

Advertising
background image

Before using

7

LSQT1006

(27)

Cassette cover

-13-

(28)

Zoom lever [W/T]

-24-

Volume lever [

sVOLUMEr]

-31-

(29)

Photoshot button [PHOTO SHOT]

-23-

(30)

Tripod receptacle

This is a hole for attaching the camera to optional
tripod/VW-CT45E. (Please carefully read the
operating instructions for how to attach the tripod
to the camera.)

(31)

Shoulder strap fixture

≥Put the strap (optional) through the fixture 1

and through the stopper

2 so it will not come

off. Extend part

3 by at least 2 cm.

≥Fit the other end of the belt similarly.

Fitting the lens cap

Fit the lens cap to protect the surface of the lens.

1

The lens cap and lens cap cord comes
preattached to the grip belt.
Pass the end of the lens cap cord through
the attached eye on the lens cap. Then pass
the lens cap through the loop made by itself
and pull tight.

≥When not using the lens cap, pull the lens cap

cord in the direction of the arrow.

1

≥When you are not recording, be sure to cover

the lens with the lens cap for protection.

2

≥When you remove the lens cap, press the knobs

firmly.

The grip belt

Adjust the belt length so it fits your hand.

1

Adjust the belt length.

1 Flip the belt.
2 Adjust the length.
3 Fix the belt.

(27)

(28)
(29)

(30)

(31)

3

2

1

2

1

1

3

2

LSQT1006ENG.book 7 ページ 2005年12月9日 金曜日 午前11時17分

Advertising