HP Concorde 608349 - Manual (Page 7)

OPERATION
Concorde t HP Plus (01–00) 7
FIG. 5
4. Turn speed control knob to slowest setting.
(Figure 6).
FIG. 6
5. Rotate control grips completely forward and slowly
turn speed control knob to desired travel speed
(Figure 7).
FIG. 7
ATTENTION: For first time users, operate at a
slower speed until maneuvering becomes easy.
6. To transport machine in reverse, simply pull
reverse drive trigger (Figure 8).
FIG. 8
7. To stop machine, release control grips and turn off
machine.
CLEANING WITH MACHINE
1. Lower brush lift lever and engage lock block
(Figure 9).
FIG. 9
2. Activate main power, pump and vacuum switches.
3. Press drive switch towards clean mode symbol
(Figure 10).
FIG. 10
Home Find... Go To..