Network setup troubleshooting – HP 6300 User Manual

Page 117

Advertising
background image

To uninstall from a Windows computer, method 3

Note

Use this method if

Uninstall

is not available in the Windows Start menu.

1.

Insert the HP All-in-One CD-ROM into your computer’s CD-ROM drive and then
start the Setup program.

2.

Select

Uninstall

and follow the onscreen directions.

3.

Disconnect the HP All-in-One from your computer.

4.

Restart your computer.

Note

It is important that you disconnect the HP All-in-One before

restarting your computer. Do not connect the HP All-in-One to your
computer until after you have reinstalled the software.

5.

Start the Setup program for the HP All-in-One again.

6.

Select

Reinstall

.

7.

Follow the onscreen instructions and the instructions provided in the Setup Guide
that came with the HP All-in-One.

To uninstall from a Mac
1.

Disconnect the HP All-in-One from your Mac.

2.

Double-click the

Applications

:

Hewlett-Packard

folder.

3.

Double-click

HP Uninstaller

.

Follow the onscreen instructions.

4.

After the software is uninstalled, disconnect the HP All-in-One, and then restart
your computer.

Note

It is important that you disconnect the HP All-in-One before

restarting your computer. Do not connect the HP All-in-One to your
computer until after you have reinstalled the software.

5.

To reinstall the software, insert the HP All-in-One CD-ROM into your computer’s
CD-ROM drive.

6.

On the desktop, open the CD-ROM and then double-click

HP All-in-One Installer

.

7.

Follow the onscreen instructions and the instructions provided in the Setup Guide
that came with the HP All-in-One.

Network setup troubleshooting

This section addresses network setup problems you might encounter after
establishing the network connection, inserting the CD and starting the software
installation.

I received a System Requirements Error: No TCP/IP

Cause

Your Local Area Network (LAN) card (NIC) is not installed properly.

Solution

Make sure your LAN card is installed properly and set up for TCP/IP.

See the instructions that came with your LAN card.

Chapter 11

114

HP Officejet 6300 All-in-One series

Troubleshooting

Advertising
This manual is related to the following products: