Set up backup fax reception – HP 6300 User Manual

Page 78

Advertising
background image

To receive a fax manually
1.

Make sure the HP All-in-One is turned on and you have paper loaded in the input
tray.

2.

Remove any originals from the document feeder tray.

3.

Set the

Rings to Answer

setting to a high number to allow you to answer the

incoming call before the HP All-in-One answers. Or, turn off the

Auto Answer

setting so that the HP All-in-One does not automatically answer incoming calls.

4.

If you are currently on the phone with the sender, instruct the sender to press
Start on their fax machine.

5.

When you hear fax tones from a sending fax machine, do the following:
a.

Press

Start Fax Black

or

Start Fax Color

on the control panel of the HP All-

in-One.

b.

When prompted, press

2

to select

Fax Receive

.

c.

After the HP All-in-One begins to receive the fax, you can hang up the phone
or remain on the line. The phone line is silent during fax transmission.

If you are not close enough to the HP All-in-One to reach the control panel, wait
several seconds, and then press 1 2 3 on your phone. If the HP All-in-One does
not begin receiving the fax, wait several more seconds and press 1 2 3 again.
After the HP All-in-One begins to receive the fax, you can hang up the phone.

Set up backup fax reception

Depending on your preference and security requirements, you can set up the HP All-
in-One to store all the faxes it receives, only the faxes it receives while the device is in
an error condition, or none of the faxes it receives.
The following

Backup Fax Reception

modes are available:

On

The default setting. When

Backup Fax Reception

is

On

, the

HP All-in-One stores all faxes it receives in memory. This
enables you to reprint up to eight of the most recently printed
faxes if they are still saved in memory.

Note 1

When the memory gets low, the HP All-in-One

overwrites the oldest, printed faxes as it receives new faxes. If
the memory becomes full of unprinted faxes, the HP All-in-One
will stop answering incoming fax calls.

Note 2

If you receive a fax that is too large, such as a very

detailed color photo, it might not be stored in memory due to
memory limitations.

User Guide

75

Fax

Advertising
This manual is related to the following products: