A.5 configuring smart meter using pushbuttons – Honeywell ST 3000 User Manual

Page 76

Advertising
background image

A.5

Configuring Smart Meter Using Pushbuttons,

Continued

Setting lower display
values,
continued

Table A-7

Setting Lower Display Values for Smart Meter Display, continued

Step Action

Meter

Display

5

Press Increase button to select the next

available digit value or Decrease button to

select the previous digit value.

Repeat this action until desired value is on

display.

6

Press LOWER VALUE button to lock-in first

digit and activate next active digit.

Readout now displays next active digit which

will be zero unless lower value was set

before.

7

Press Increase button to select the next

available digit value or Decrease button to

select the previous digit value.

Repeat this action until desired value is on

display.

8

Press LOWER VALUE button to lock-in

second digit and activate next active digit.

Readout now displays next active digit which

will be zero unless lower value was set

before.

First digit value setting.

%

100

0

ANALOG

UPPER

VALUE

UNITS

LOWER

VALUE

S E T

VAR

SEL.

0

0
1
2
3
4
5
6
7
8
9

Press and hold to
scroll forward
through values

Press and hold to
scroll backward
through values

Continued on next page

66

ST 3000 Release 300 Installation Guide

2/05

Advertising