Heartland Bakeware 9200/7200 - Manual (Page 27)

27
Rack Supports
The oven rack supports are designed to interlock into the oven sides but are easy to remove. First
remove oven racks, then grasping the lower portion of the rack support swing it out to approx. 45
degrees and gently pull down. Assemble in reverse order.
Interior Oven Rack
The oven rack is designed with stop-locks so that when placed correctly on the supports, it (a) will
stop before coming completely out of the oven, (b) will not tip when placing or removing food.
To install, place the rack "feet" on the rack support and push the oven rack backward along the rack
support. (see 1 )
Push the oven rack all the way to the back until the oven rack slips off the end of the rack support.
(see 2 )
Then pull rack support ahead slightly to engage the "feet" with the rack support. (see 3 ) To remove
reverse assembly procedure.
Oven Rack “Feet”
Rack Support Oven Rack
Figure 23
Figure 24