Heartland Bakeware 9200/7200 - Manual (Page 7)

7
Electrical Installation
THE MODEL 7200/9200 GAS RANGE MUST BE ELECTRICALLY GROUNDED IN COMPLIANCE WITH LOCAL
CODES AND IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL ELECTRICAL CODE ANSI/NFPA 70 “LAT-
EST EDITION” IN THE U.S. OR THE CANADIAN ELECTRICAL CODE, PART I, CSA STANDARD C22.1 IN CANADA or
YOUR NATIONAL ELECTRICAL CODE.
Connect the female end of the power cord to the main power (male) receptacle at the rear of the stove. See page 10 for
receptacle locations and figure 3 for receptacle illustration.
This range must be plugged into a properly grounded/earth receptacle. The grounding/earth prong must not be removed
from the plug. DISCONNECT THE ELECTRICAL SUPPLY BEFORE SERVICING THE APPLIANCE.
The receptacle to be used for this appliance must be wired to STANDARD WIRING PRACTICES.
Exhaust Hood Electrical Connection
After your exhaust hood has been installed the very last thing to do is to connect the special plug to the range. The
female receptacle for the exhaust hood is located at the rear of the stove by the main power (male) receptacle (See page
10 for receptacle locations and figure 4 for receptacle illustration). Simply plug the cabinet power cord into the receptacle,
be sure to test all functions of the cabinet.
male receptacle female end of the power cord
female receptacle male end of the cabinet power cord
Cabinet power hook-up
Figure 4
Main power hook-up
Figure 3