Hasselblad CF-MS - Manual

www.hasselblad.com
digital CaMERaS
View Camera solutions
Hasselblad Product
Flash Sync Flash Sync Used with Electronic Shutter* Electronic Shutter with Full Control
H3d, H3dii, H3dii-MS Yes Yes Yes
CF, CF-MS Yes Yes Yes
503CWd, CFV Yes Yes No
With digital photography it has become easier to work the tilt/shift
mechanism of a view camera and hereby achieve a special photo-
graphic expression. the digital solutions however, are still heavy to
bring into the field, and controls to place the wanted focus correctly
are not optimal. New ground breaking developments on the H3d camera system
allow for direct tilt/shift work using the new HtS1.5 tilt/shift
adapter, and the new HVC view camera adapter kit allows for
classic view camera work both un-tethered and with new levels of
focus control.
*If using an electronic shutter via flash sync connections, please note it will NOT be possible to control shutter and aperture values from Phocus.
View Camera Connectivity
View Camera Connectivity
All Hasselblad digital camera products can work with view cameras.
Both the H3d camera products and the CF range of digital backs have
a sophisticated interface, and allow micro-processor controlled connec-
tions to electronic shutters for full control capture mode (single-shot,
multi-shot) and of aperture, shutter and exposure.
the remaining digital products are triggered by a simple flash sync
connection. a summary is outlined in the table below.
the digital capture unit of the H3d and the 503CWd camera
products can be removed and mounted on a view camera platform.
the CF/CF-MS/CFV digital back can also be mounted onto a view
camera platform.
two options are available to physically attach the digital capture
unit to the view camera. the first is known as a live Video adapter,
as the only method of composing and focusing the image is done via
the live Video controls in Phocus. the second is the Sliding adapter
that allows use of a conventional ground glass screen for composition
and the ability to then slide the back in place. these items are easily
obtainable from third party suppliers.
Please refer to links at the end of the Datasheet.