Honeywell ZIO /ZIO PLUS TR70 - Manual (Page 3)

ZIO ® /ZIO PLUS LCD WALL MODULES
3 63-1322—02
and S-BUS is 18-24 AWG (0.82 to 0.20 sq mm) depending on
application, plenum or non-plenum rated, unshielded, twisted
pair, solid conductor wire.
LCD Display
The LCD display may be customized for tenant and contractor
users. The following are a few samples of the various Home
screens that are configurable for the LCD Wall Modules. Not
all possible Home screens are illustrated here. There are
many other configurable Home screens.
NOTES:
1. Home screens can display one to three of any of
the following parameters: Temperature Setpoint,
Room Temperature, Room Humidity, Outdoor
Humidity, Outdoor Temperature, and Time, or one
of virtually any parameter in the controller.
2. Refer to the Zio/Zio Plus LCD Wall Modules Oper-
ating Guide (form 63-2719) for information about
customizing the wall module configuration in the
WEBs-AX Workbench, such as modifying the
default Home screens or creating your own appli-
cation.
Sample Tenant LCD Displays
The Fan and Occupied settings are optional for Home screen
setup. If there are no parameters configured for Tenant
access, the “View More” softkey does not display on the
Tenant Home screen.
Fig. 3. Sample Tenant Home screen with System Status,
Setpoint, Outside Temperature, and
Room Temperature (predominant).
Fig. 4. Sample Tenant Home screen with Room
Temperature and Time (predominant).
Fig. 5. Sample Tenant Home screen with
Setpoint display only.
Fig. 6. Sample Tenant “View More” display showing
CO
2
sensor value from controller.
NOTE: Any configured parameter may be displayed.
Sample Contractor LCD Displays
The Contactor mode allows advanced options using the
softkeys. Contractor mode also allows for customizing the
Tenant view, including setting the tenant’s Home screen and
“View More” access.
Fig. 7. Sample Contractor Home screen display with
System Status, Setpoint, Outside Temperature,
and Room Temperature (predominant).
CONTACTOR HOME SCREEN SOFTKEYS
The three softkeys on the Contractor Home screen (Fig. 7)
provide the following:
SET HOME SCREEN - allows the contractor to choose
among multiple Home screen options for the tenant.
M27354
M27379
M27377
M27356
M27357