Heath Zenith Wireless Chime 6153 User Manual

Wireless chime

Advertising
background image

© 2008 HeathCo LLC

595-5611-07

This package includes (Style of push button and chime may vary from illustration):
• Wireless chime
• Wireless push button (model 6162 includes 2) with battery
• Hardware pack
This chime requires 3 “D” alkaline batteries (not included). In typical use,
alkaline batteries will last up to three years.

Wireless Chime

Figure 1

WARNING: To prevent possible

SERIOUS INJURY or DEATH:

• NEVER allow small children near

batteries.

• If battery is swallowed, immediately

notify doctor.

1. Install alkaline type A23 12 volt push button

battery (included). Remove back of case by
pushing in tab on bottom with a small screw-
driver (see Figure 1). See diagram inside push
button for correct battery orientation. Note: If
batteries are preinstalled, remove orange
battery tab.

2. Open chime case. Press in catch on bottom of

chime and lift the case open (see Figure 2).

3. Install 3 alkaline “D” batteries. Make sure

batteries are oriented properly (see Figure 3).

4. Test range. Temporarily position chime and

push button where you want them mounted.
Press push button to verify chime and push
button work properly. If chime does not sound,
see Troubleshooting.

5. Adjust volume control. Adjust volume control

to desired volume (see Figure 3).

T

y

p

e

D

T

y

p

e

D

T

y

p

e

D

Chime

Volume

Figure 2

Figure 3

Models 6153 / 62 / 71 / 72

Advertising
This manual is related to the following products: