Honeywell CJ 110MVA - Manual (Page 16)

16
English
CONNECTING WITH CLEANER
By connecting with cleaner (sold separately)
through dust collection adapter and adapter (sold
separately), most of dust can be collected.
(1) Remove the allen wrench from the base.
(2) Move the base fully forward. (Fig. 10, 11)
(3) Attach the chip cover.
(4) Connect the dust collection adapter with
adapter. (Fig. 18)
(5) Connect the adapter with the nose of cleaner.
(Fig. 18)
(6) Insert dust collection adapter into the rear hole
of the base until the hook catches in the notch.
(Fig. 19)
(7) Press the hook to remove the dust collection
adapter.
Fig. 18
Dust collection
adapter
Adapter
Chip
cover
Base
Nose
Cleaner
Hook
Notch
Fig. 19
Dust
collection
adapter
Adapter
Base
Nose
Rear
hole