Honeywell DOLPHIN 9951 - Manual (Page 131)

12 - 7
RS-232 Pin Configuration
Refer to this table if you want to make your own cables.
To do so, you must determine if your host RS-232 device is:
• 9-pin or 25-pin and
• configured as a DCE or DTE device.
Base/Host Port (DCE) IBM AT DB9
(DTE) IBM XT DB25
(DTE) Modem DB25
(DCE)
Pin / Input Signal
2 / (RD) 2 3 2
3 / (TD) 3 2 3
5 / (SG) 5 7 7
4 / (DTR) 4 20 6
6 / (DSR) 6 6 20
7 / (RTS) 7 4 5
8 / (CTS) 8 5 4