Power supply, Supplying power, Supplying power -3 – Honeywell DOLPHIN 9951 User Manual
Page 135
Advertising
13 - 3
Power Supply
The base includes a power supply that contains a power adapter to ensure the proper voltage. The power
adapter is plugged into standard AC/DC outlets.
Supplying Power
1.
Be sure the power switch on the power adapter is in the OFF position.
2.
Plug the power cord into the power adapter.
3.
Plug the power connector cable into the power connector on the back panel of the base.
4.
Plug the power cord into a standard wall outlet.
5.
On the power adapter, turn the power switch to the ON position. The LEDs illuminate as the base
powers up.
6.
The base is ready to begin charging terminals.
Advertising