Holder C-Trac 4.74 - Manual (Page 67)

C 4.74
Operating instructions
66 149 443
Operation
3 2 1
Bild_C166
4
Bild_C168
Driving with SDS (Special Drive System)
For setting programs 1-3 with the program switch (2) see
the operation section on pages 61 and 62.
Driving program 4 (SDS)
-
Set the program switch (2) to driving range 4.
NOTE
At this level the fine control knob (1) is not
working. The function is assumed by the pedal
(4).
- Adjust the engine rpm with the hand throttle (3).
- You can now control the vehicle speed steplessly with
the pedal (4) (accelerator).