Holder C-Trac 4.74 - Manual (Page 91)

C 4.74
Operating instructions
90 149 443
Operating the implements
5
3 2 4 1
6
Bild_C179
Switching the front power lift to double-acting
The front power lift can be switched from single-acting to
double-acting.
- To switch to double-acting press button (5). The red
LED (6) goes off.
- To switch to single-acting toggle button (5). The red
LED (6) comes on.
NOTE:
The front power lift is always single-acting
when the vehicle is started or when the main
switch for the working hydraulic system is
turned on.
Operating the tilting device with the keyboard
- Keep button (4) depressed.
•
The front power lift tilts to the right.
You can stop the movement by releasing the button.
-
Keep button (3) depressed.
•
The front power lift tilts to the left.
- Press button (1). The red LED (2) comes on.
•
The float position of the tilting device is turned on,
ie the implement can be moved by external force.
- Press button (1,3 or 4) or move the joystick to turn it
off. The red LED (2) goes off.