Heath Zenith 598-1214-03 User Manual

Page 12

Advertising
background image

12

598-1214-03

4. Set ON-TIME Control. Determine the amount of

time you want the connected device to stay on
after motion is detected (1 or 5 minutes). Slide the
ON-TIME control to the corresponding setting.

ImporTaNT: Avoid Aiming Control At:
• Objects that change temperature rapidly, such as

heating vents and air conditioners. These heat
sources could cause false triggering.

• Areas where pets or traffic may trigger the control.
• Nearby large, light colored objects reflecting

light may trigger the shut-off feature. Do not
point other lights at the sensor.

Figure 9 - Motion Sensor Sensitivity

The detector is most sensitive to motion across its
field of view.

Least Sensitive

Most Sensitive

Sensor

Motion

Motion

Sensor

Advertising