Remote control, Figure 1 - rear view of remote control – Heath Zenith 598-1214-03 User Manual

Page 5

Advertising
background image

5

598-1214-03

One remote control is able to independently operate
two receiver units. If more than two receiver units,
operating independently, are desired, additional
remote controls will need to be purchased.
1. Remove Tab from Battery Chamber. Remove

cover from back of transmitter. Gently pull tab
out of battery chamber (see Figure 1). Slide
cover onto transmitter.

reMote ControL

2. Remote Control Functions. The three buttons

on the left side of the remote will operate one
or more receiver units with matching code set-
tings. The three buttons on the right side of the
remote will operate a second set of one or more
receiver units (see Figure 2).

• on: Turns on any receiver unit set to the same

code as this remote control.

• oFF: Turns off any receiver unit set to the same

code as this remote control.

Battery Chamber
(Type A23)

Battery Cover

Tab

ON DIP

1 2 3 4

ON DIP

1 2 3 4

Figure 1 - Rear View of Remote Control

Advertising