Wireless motion sensor, Features, Select night or 24 hour mode – Heath Zenith 598-1214-03 User Manual

Page 8: Installing batteries, Figure 4 - battery compartment (rear view), Detect control polarity mark

Advertising
background image

8

598-1214-03

WireLess Motion sensor

Features:

• No wiring required.
• Up to 70 feet sensing range, 180° Coverage.
• Adjustable sensitivity.
• Day/Night or Night only operation.
• Test mode.
• Uses 2 AA batteries.
• Wall or eave mount.
• Controls receivers up to 100 feet away.

select night or 24 hour Mode

This sensor is able to detect motion day and night or
night only. To set the detection mode, remove rear
panel by sliding the panel down. Remove batteries
if necessary. Slide the DETECT switch to either the
DAY/NIGHT or NIGHT ONLY position. Replace
rear panel by reversing the above instructions.

installing Batteries

Before mounting sensor, remove rear panel by
sliding the panel down. Install 2 AA batteries
according to polar-
ity markings inside
the battery compart-
ment (see Figure 4).
Replace rear panel
by reversing the
above instructions.

Figure 4 - Battery

Compartment (Rear View)

DETECT

CODES

1 2 3 4

DAY

NIGHT

NIGHT

ONLY

Detect
Control

Polarity
Mark

Advertising