HP DL385 - Manual (Page 45)

Hardware options installation 45
12. Close the processor retaining bracket.
13. Open the latches on the corresponding PPM slot.
14. Install the PPM.
NOTE: The appearance of compatible PPMs may vary.
15. Install the air baffle.
16. Install the access panel (" Installing the access panel " on page 29 ).
17. Power up the server (on page 27 ).
Memory options
You can expand server memory by installing PC3200 or PC2700 Registered DDR SDRAM DIMMs. The
server supports up to 32 GB of memory using eight 4-GB DIMMs.
NOTE: The server is set to Advanced ECC Support. For more information, refer to "HP ROM-Based
Setup Utility (on page 79 )" or the HP Rom-Based Setup Utility User Guide located on the Documentation CD.