Honeywell Dolphin 7900 - Manual (Page 9)

7
Configuring the Net Base with a Static IP Address
1. Connect the serial cable to the Serial DB-9 Connector on the back
of the Net Base and a COM port on the host computer. Do NOT
connect to the network at this time.
2. On the workstation, start Hyperterminal. Use these settings:
115200 bps, 8,N,1.
3. Wait until login prompt displays on Hyperterminal.
4. Enter the user name <handheld> and default login password
<handheld> to log into network.
5. Enter choice 3 (Express Setup) and enter the configuration
information requested at each prompt.
6. Press OFF on the power adapter and reconnect the Ethernet cable.
7. Press ON on the power adapter. The Net Base boots up using the
configuration information entered in Step 5.
SD00032Login: handheld
Password: ********
1) View System Configuration
2) View Current Values
3) Express Setup
4) Advanced Setup
5) System Statistics
6) System Diagnostics
7) Help
x) Exit
Enter choice: 3