hussmann P/N 0387183_D - Manual (Page 20)

INSTALLING SPLASHGUARDS
The splashguard is shipped inside each mer-
chandiser. A
FTER
merchandisers have been lev-
eled and joined, and all drip piping, electrical
and refrigeration work has been completed,
re-install the front color panel, then install the
splashguards.
First, position top of splashguard over the top
edge of the bracket; second, push the lower edge
of the splashguard toward the bottom of the
bracket until it snaps into place.
Splashguards are joined with a galvanized
metal splice connector that comes with the
joint kit. Join the splashguards before
installing on case.
3-2 D
RIP
P
IPING AND
S
PLASHGUARDS
P/N 0387183_D WWW . HUSSMANN . COM
1
2
Splashguard
Retaining
Bracket
Splashguard
Joint
Side
Detail
Splice Connector
Splashguard