hussmann P/N 0387183_D - Manual (Page 33)

REPLACING DRAIN PAN HEATER —
ELECTRIC AND GAS DEFROST
(Low Temperature Only )
The drain pan heater is located as shown
below.
Remove Drain Pan Heater
1. Disconnect power.
2. Pull heater out from under jiffy clips.
3. Position new heater under jiffy clips. Be
sure offset is properly positioned around
the drain. If jiffy clips are removed, make
certain sealer is replaced.
4. Reconnect power.
5. Verify that heater is working correctly.
Reach-In
P/N 0387183_D 6-5
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Drain Heater
Sealer
Screw
Jiffy Clip
Detail
Drain Heater Offset
Jiffy Clip
Drain
Heater
Sealer
Screw
Jiffy Clip
Side View
Always disconnect the electrical power at
the main disconnect when servicing or
replacing any electrical component. This
includes, but is not limited to, such items
as fans, heaters, thermostats and lights.
WARNING
!