Caring for your iron and soleplate, Fabric setting chart – Hamilton Beach 840121300 User Manual

Page 5

Advertising
background image

9

8

Caring for Your Iron and Soleplate

1. The Water Tank of your iron should

be emptied after each use. Turn
Temperature Control Dial to OFF.
Unplug the iron and hold over a
sink. Turn iron upside down until
Water Tank Opening is parallel with
sink. Water will run out of water
tank opening.

2. After iron has completely cooled,

fully retract cord into iron and store in an upright position.
Do not store iron laying flat on soleplate.

Soleplate

1. Never iron over zippers, pins, metal rivets, or snaps, as

these may scratch the soleplate.

2. To clean occasional build-up on the soleplate, wipe with

a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.

3. Always store iron upright in the heel rest position.

Fabric Setting Chart

Temp. Control

Setting

Off

Nylon

Acrylic

Silk

Polyester

Wool

Rayon

Cotton

Linen

Ironing Instructions

Steam

Setting

Dry iron on the wrong side of the fabric.

Dry iron on the wrong side of the fabric.

Dry iron on the wrong side of the fabric.

Iron with fabric still damp.

Steam iron on the wrong side of fabric.

Iron on the wrong side of fabric.

Iron while still damp using steam
and/or spray.

Iron on wrong side of fabric while still
damp.

O

840121300 ENv03.qxd 2/10/04 11:18 AM Page 8

Advertising