Verifying the repair – HP Pavilion ze5300 User Manual
Page 139
Swapping modules that might be defective with others known to be good is generally an ideal way to
find the module responsible for the problem. A failure symptom is rarely caused by more than one
module, so you will not usually need to replace more than one to correct a particular failure.
After you replace a module, the notebook will normally be in a confused state and lock up when you
apply power. If this happens, press the reset button: this turns the notebook off, so that you can restart
it in a known state.
Verifying the Repair
Before returning the repaired notebook to the customer, verify the repair by running the following
tests:
• e-
Diagtools Basic Diagnostic Test.
Run the basic test of the e-Diagtools diagnostic program
–and–
•
Function Tests.
Run tests that check the repaired function, such as those in e-Diagtools
–and–
•
Failed Tests.
Run any other tests that failed during troubleshooting.
3-4
Troubleshooting and Diagnostics
Service Manual