Communication, Communication options, Installing additional software – Hand Held Products DOLPHIN 7600 User Manual
Page 59: Chapter 6 - communication
6 - 1
Communication Options
Dolphin terminals offer several communication options including Microsoft ActiveSync, infrared, and wireless radios.
I/O Connector (Wired Communication)
The mechanical connector on the bottom panel (see
on page 3-14) connects the terminal to various
Dolphin communication peripherals that connect to a host workstation via USB (1.1 or higher), thus enabling
ActiveSync communication.
Wireless Radios (Wireless Communication)
Dolphin 7600 terminals can be equipped with an 802.11b/g or Bluetooth radio or a combination of these radios.
IrDA Port (Wireless Communication)
The IrDA port enables the Dolphin to transmit data via pulses of infrared light to and from other IrDA-compliant
devices, such as printers, workstations, and even other Dolphin terminals.
Installing Additional Software
Dolphin terminals ship with the operating system, radio drivers, and custom Hand Held Products software loaded onto the device.
These are the default programs that install when your terminal first boots up. You can install additional software programs to the
terminal provided that the following parameters are met:
•
the software program was created for a Windows CE device.
•
The terminal has enough memory to store and run the program.
•
The program has an *.exe, *.cab, or *.dll extension.
When selecting programs, verify that the program and version of the program are designed for the Windows CE 5.0 and the
terminal’s processor. You can verify your processor by tapping Start > Settings > Control Panel > System > General tab. Make a
note of the information in the Processor field.
To install additional software, you can use the communication options described in this chapter.
•
Adding Programs via ActiveSync
•