HP 1080p - Manual (Page 106)

Using Digital Media
Using Digital Media 93
Setting up a wired connection
6 Follow the onscreen instructions. The wizard
checks for the network, the IP address, and then
for access to the Internet across the network.
If the TV shows an error message:
Check that the wired LAN (Ethernet) cable is
properly connected at the TV and the router.
Check that the computer, router, and other
network equipment are all turned on.
7 Click Finish.
Wait while the TV looks for authorized servers on
the network.
This completes the wired network settings.
8 Press the Media button to display the Media main
menu. To use the menu, see “Using Digital Media”
on page 83.
Setting up a wireless connection
9 Make sure the wireless network is working.
10 Follow the onscreen instructions. To use the
onscreen keyboard:
Press the Arrow buttons on the remote control
to select an item or key on the onscreen
keyboard, and then press OK to enter your
selection.
Or
Press a number button on the remote control as
needed to scroll to the character you want.
11 Wait while the TV looks for authorized servers on
the network.
12 Select a server, and then press OK.
This completes the wireless network settings.
13 Press the Media button to display the Media main
menu. To use the menu, see “Using Digital Media”
on page 83.
Using the Demo option
In the Settings menu, select Demo, and then
press OK.
The Demo provides a demonstration of the Photos,
Videos, and Music menus. You can navigate through
the Photos in thumbnail view (All Photos), through a
Music list of songs (All Music), or through a Video list
of videos (All Videos). You can also play an example
video.
While in the Demo:
Press an Arrow button to select an option in the
Demo, and then press OK.
Press the Back button to exit an option.
After a period of no interaction with the TV, the
Demo shows a movie and continuously repeats it.
Press any remote control button to return to the
Demo mode.
If you turn off the TV while in the Demo mode,
when you turn on the TV again, it again shows the
Demo mode.
To exit the Demo, press Media, select Settings and
press OK, select Demo Mode, and then select Exit
Demo, and press OK.
Changing the Language option
1 Press the Media button on your remote control to
open the Media main menu.
2 Press an Arrow button to select Settings, and
then press OK.
3 Press an Arrow button to select Language, and
then press OK.
n
For a wireless network, you need the
network name or SSID, and the network
security information (the WEP key, or the
WPA passphrase).