Honeywell RAPID EYE K5404V9 - Manual (Page 30)

View: Operator Guide
2–14
Table 4
Resolution legend: NTSC camera (pixel × pixel).
resolution gauge n/a
resolution legacy 160Ч120 320Ч240 640Ч240 640Ч480* 704Ч480*
* Not shown when connected to Multi-Media LT units.
PAL resolutions: Multi-Media
Table 5
Dynamic resolutions for PAL cameras
unit processor (CPU) resolution (pixel × pixel)
type* 192Ч144 384Ч288 704Ч288 704Ч576 †
Pentium 4 (P4) * * * *
Pentium 3 (P3) * * < =
P3 running older software * < = unavailable
* Use procedure !28, below on p. 2–14, to identify a Multi-Media unit’s processor.
† Not available on Multi-Media LT units, except during maximal zoom of one video feed
while using LocalView.
Table 6
Resolution legend: PAL camera (pixel × pixel).
resolution gauge
resolution (pixel × pixel) 192Ч144 384Ч288 704Ч288 704Ч576*
* Not available on Multi-Media LT unit.
Multi-Media unit’s processor
! ! ! !28 To identify a unit’s processor
1. Continue or start a maintenance session for the Rapid Eye site.
2. Click the Hardware tab. Next to Main Board, the unit’s central processing unit
(CPU) is listed—P4, P3 and so on.
3. You have the option of ending the maintenance session.
If you have access to the unit, you can interpret the unit’s processor from the message
displayed on the unit’s blue screen, by using table 7.