Locating back panel components – Handspring Treo 300 User Manual

Page 16

Advertising
background image

Section 1

8

Introduction to Your PCS Phone Handspring

®

Treo™ 300

6. LED:

Provides status information for your PCS Treo 300 based on the

color of the light and the blink state.

No light:

Wireless mode off

Solid:

Connected to travel charger

Green = Fully

charged

Red =

Charging

Blinking:

Wireless mode on

Green =

In coverage area

Red =

Out of coverage area

Double-blink red:

Low battery

Locating back panel components

1. Electronic Serial Number (ESN):

Uniquely identifies your phone to

the PCS network. During the activation process, you are prompted to
provide this number.

2. Reset button:

Under normal use, you should not have to use the

reset button. See Section 9 for information about when and how to
use the reset button.

3. Charger and USB/serial connector:

The connector that connects

your phone to the travel charger and HotSync cable. The HotSync
cable connects to a USB port or serial port on your computer and
enables you to synchronize the information between your phone and
computer using HotSync technology.

2. Reset

button

3. Charger and

USB/serial
connector

1. Electronic

Serial
Number

Advertising