Printing on letterhead or preprinted forms, Printing on – HP 2500n User Manual
Page 49
ENWW
Chapter 2 Printing tasks 47
Printing on letterhead or preprinted forms
This section shows how to orient letterhead or preprinted forms when you are printing only on
one side. For duplex (two-sided printing) orientation, see
“Printing on both sides (duplexing
●
Orient paper as shown below.
Orientation of letterhead in tray 1: side to be printed up, top edge in first.
Orientation of letterhead in tray 2 or optional tray 3: side to be printed down, top edge
toward the front of the tray.
●
Lower the rear output door if the paper is heavy to reduce curl.
●
Avoid raised or embossed letterhead.
●
Avoid letterhead that is printed with low-temperature inks, such as those used in some types
of thermography.
●
The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored
paper or preprinted forms use inks that are compatible with this fusing temperature (195° C
or 383° F for 0.1 second).