Honeywell HCD484L - Manual (Page 16)

Rev 2 11 G-113079-002
02/07
Menu Item Option Description
1 CAMERA
ID
000 (off), 001 … 255 0: Turns ID display off. See
Sync Control Setup for more
information.
2 ELC / ALC
Mode
ELC …
ALC … See ELC / ALC Mode for
more information.
3 Shutter
Speed
1/60 NTSC (1/50
PAL)
FL
1/250
1/500
1/1000
1/2000
1/4000
1/10000
1/30000
1/50000
Adjust brightness with high
shutter speed.
FL: Removes flicker in a
picture.
This field is not adjustable
when the camera is set to
ELC MODE. Auto is
selected by default.
4 White
Balance
ATW (Auto Trace
White Balance)
AWC (Auto White
Balance Control)
MWB (Manual White
Balance) Preset white balance modes
include Outdoor, Indoor,
User, Fluorescent. See
White
Balance Control Setup for
more information.
5 AGC
Control
OFF
10 dB
12 dB … 38 dB Adjust maximum value of
AGC gain. When AGC is set
to OFF, Nightshot is not
available.
6 Nightshot Set how the camera reacts
to low light illumination.
7 Sync.
Control
AUTO
INTERNAL
LineLock (V.Phase) See Sync Control Setup for
more information.
8 Restore
Default
Reload the factory default
settings. If you have not
made any changes, you will
not be able to select this
setting.