Sync control setup, Exit setup menu, Sync control setup exit setup menu – Honeywell HCD484L User Manual

Page 21: Eng lish

Advertising
background image

Rev 2

16

G-113079-002

02/07

Eng

lish

Sync Control Setup

To synchronize the vertical interval sync pulse of your
camera with other equipment to reduce the effect of picture
roll on the monitor.

Figure 14

Sync Control Setup

Exit Setup Menu

To exit the SETUP menu.

Figure 15

Exit Menu

Menu Item

Description

INTERNAL

When line lock is not required.

LINELOCK

Adjust the proper phase:

V.PH: 000 to 300 (factory default is 0)

Note

Line lock is not available in 12 VDC power.

AUTO

Camera automatically detects synchronization.

RETURN

Press MENU to return to the SETUP MENU.

Menu Item

Description

SAVE AND EXIT

Press MENU to save your changes and exit.

EXIT

Press MENU to quit without saving your
changes.

RETURN

Press MENU to return to the SETUP MENU.

<SYNC. CONTROL>

SYNC MODE:

LINELOCK
V.PH 000
STEP=10

RETURN

<EXIT MENU>

SAVE AND EXIT
EXIT

RETURN

Advertising
This manual is related to the following products: