Honeywell DOLPHIN 99EX User Manual

Page 133

Advertising
background image

12 - 3

AUX Battery LED

Indicates status of the battery charging in the auxiliary battery well; see

Back Panel

on page

12-4.

For information about charging a battery in the auxiliary battery well, see page 12-6.

COMM LED

This is the communication LED. It indicates the status of data transfer between the Dolphin
terminal and the host device. The color of this LED differs if the base is using the serial or USB
port connection.

If using the serial port

If using the USB port

This color

means…

Orange

The auxiliary battery is charging.

Green

The auxiliary battery has completed charging and is ready for use.

Red, Flashing The internal temperature of the auxiliary battery is too hot or there is a battery error.

Charge the auxiliary battery in a cooler environment or replace the battery with a
new Honeywell Li-ion or Li-poly battery.

This color

means…

Red

Serial data is being sent from the host device to the base.

Green

Serial data is being sent from the base to the host device.

Orange

Serial data is being sent in both directions at the same time.

This color

means…

Green

A USB Connection is established with the host workstation.

Advertising