HoMedics TE-100 - Manual (Page 4)

INSERTING AND REPLACING
BATTERIES
1. Remove the battery cover as shown in
Figure 1.
2. Carefully remove the battery by pressing
down on the metal clip holding the
battery in place. Do not use metal
tweezers or a screwdriver to remove the
battery.
3. Insert one CR-2032 (3.0 V dc) battery
with the plus symbol (+) up as shown in
Figure 2.
4. Replace the battery cover.
6 7
Each individual’s physiology is different and you should
monitor your own body temperature to determine your
“normal” temperature range in order to determine when a fever
is present. Classification of a temperature as a fever also varies
by age.
This product is not intended as a substitute for consultation
with a physician. Contact your physician if you feel an illness
is present with or without a fever.
A physician should be consulted if any of the following
conditions are present: Vomiting, diarrhea, changes in
breathing, activity, or appetite, irritability, lethargy, or unusual
sleepiness.
DESCRIPTION OF DISPLAY SYMBOLS
DEVICE DESCRIPTION
Figure 1
Figure 2
Probe
LCD
Display
Scan Button
NOTE:
˚C/˚F Toggle Button
located behind
battery cover
cc
Temperature
Celsius
Fahrenheit
Measurement
Indicator Memory
Symbol
Low Battery
Warning Fever
Alarm