Hunter Fan ICC-801PL - Manual (Page 26)

22
PM
SET CURRENT
DATE / TIME
PROGRAMMING THE CONTROLLER ...................................................................................
Two key features of the ICC that make programming a snap are its clear,
easy-to-read LCD display and its easy-to-use dial design.
The ICC display shows time and day when the controller is idle. The
display changes when the dial is rotated to indicate the specific
programming information to enter. When programming, the flashing
portion of the display can be changed by pressing the
or
buttons. To change something that is not flashing, press or until
desired field is flashing.
The ICC controller offers maximum scheduling flexibility including four
programs, each with up to 8 daily start times, permitting plants with
different watering requirements to be separated on different day
schedules. Multiple start times permit morning, afternoon and evening
watering, perfect for the establishment of new lawns and thirsty annual
flowers. A built in 365-day calendar clock accommodates odd/even
watering restrictions without requiring monthly reprogramming. Or, just
simply designate the days of the week you want to water or use the
convenient day interval watering. The ICC makes it easy.
NOTE: A basic programming rule is that whatever
symbol or character is flashing will be the item
programmed. For instance, if the hour is flashing
when setting the time, the hour can be changed or
programmed. For illustration purposes, flashing
characters are in
GRAY type.
SETTING THE CURRENT DATE AND TIME
1. Turn the dial to the SET
CURRENT DATE/TIME position.
2. The current year will be flashing
in the display. Use the and
buttons to change the year.
After setting the correct year,
push the
button to proceed
to setting the month.
3. The month and day will be in the
display. The month will be
flashing. Use the
and
buttons to change the month.
Press the
button to proceed
to setting the day.
4. The day will be flashing: Use the
and buttons to change
the day of the month. (The day
of the week is automatically
indicated by an arrow in the
bottom of the display pointing
to the day.) Press the
button
to proceed to setting the time.
5. The time will be displayed: Use
the and buttons to select
AM, PM, or 24 hr. Press the
button to move to minutes.
Minutes will be flashing. Use the
and buttons to change
the hour shown on the display.
Press the
button to move onto the minutes. Minutes will be
flashing. Use the and buttons to change the minutes shown
in the display. The date, day, and time have now been set.