Hunter Fan ICC-801PL - Manual (Page 28)

24
PROGRAMMING THE CONTROLLER (continued) ..............................................................
SET STATION
RUN TIMES
START TIME
START TIME
SETTING STATION RUN TIMES (Length of Watering for Each Area)
1. Turn the dial to the SET
STATION RUN TIMES position.
2. The display will show the last
program selected (A, B, C, or
D) the station number
selected, and the run time
for that station will be
flashing. You can switch to
another program by pressing
the
button.
3. Use the and buttons to
change the station run time on
the display.
4. Press the button to
advance to the next station.
5. Repeat steps 4 and 5 for each
station.
6. You may set station run times from 1 minute to 2 hours. If the
station is assigned program D, the run time can be set for up to
12 hours.
7. You can move between programs while staying on the same station.
However, it is recommended that one program is completed before
going on to the next program. Jumping between programs can be
confusing and may result in program errors.
NOTE: If a station is assigned a run time on
program A, B, or C, then that station cannot be
assigned to Program D. If this is attempted, the
word USED will appear in the display. Likewise, a
station with a run time on Program D cannot be
assigned to program A, B, or C. This is to prevent
the accidental assignment of a rotor or spray zone
to the D program which is normally reserved for
drip applications.
SET DAYS TO
WATER
SETTING DAYS TO WATER
1. Turn the dial to the SET DAYS
TO WATER position.
2. The display will show the last
program selected (A, B, C, or
D) the station number
selected, and the run time
for that station will be
flashing. You can switch to
another program by pressing
the
button.
3. The controller displays
currently programmed active
day schedule information. This dial position provides four different
water day options: choose to water on specific days of the week,
you can choose interval watering, or choose to water on odd days
or even days. Each program can only operate using one type of
water day option.