Hunter Fan ICC-801PL - Manual (Page 9)

5
D – Wiring Cabinet
20. 9-Volt Battery – The alkaline battery keeps time during power
outages or if the transformer is disconnected. The user may also
program the controller without AC power.
21. Reset Button – This button will restart the computer in case of
power surge or display freezing. No programmed data will be
lost.
22. Power Module Area – Used to attach transformer, master valve,
and other systems from their source to the controller.
23. Transformer – A transformer is installed in the controller to route
AC power from the power cable to the terminal strip area and to
ground the controller.
24. Junction Box – This box contains a terminal strip for connecting
115 volt and 230 volt power connections.
25. Station Modules – There are 4 (plastic cabinet) or 6 (metal or
stainless steel cabinet) modular positions inside the controller.
With the addition of 4 or 8 station ICM modules, you have the
ability to run anywhere from 8 to 32 stations (plastic cabinet),
and 8 to 48 stations (metal and stainless steel cabinet).