Handspring VisorPhone - Manual (Page 79)

Customizing Your Phone 73
Unlocking your phone
1. Turn on your phone.
2. Press the Phone button on your VisorPhone.
3. Enter your password.
Note: If you haven’t set your own password, enter the password listed
in your service provider documentation. This is usually 1234
or 1111.
If you are using a SIM card from an established account, enter
your existing password.
4. Tap OK.
Tip: See “Preventing unauthorized use of your phone” on the previous
page to learn about setting your own password.
Tap numbers to
enter password
Tap OK to unlock
your phone Tap CLR to erase
the entire entry