HONDA IGX440 - Manual (Page 18)

ENGLISH
Specifications (standard types) Tuneup Specifications
ITEM SPECIFICATION MAINTENANCE
Specifications (low profile types)
PTO shaft type S
PTO shaft type V
18
407 505 454 mm
(16.0 19.9 17.9 in)
39.4 kg (86.9 lbs)
4-stroke, overhead camshaft, single
cylinder
438 cm (26.7 cu-in)
[88.0 72.1 mm (3.46 2.84 in)]
Spark plug gap
Valve clearance
(cold)
Other
specifications
IN: 0.12 0.02 mm
EX: 0.15 0.02 mm
0.70 0.80 mm
(0.028 0.031 in)
Refer to page: 11
See your
authorized
Honda dealer
No other adjustments needed.
Counterclockwise
CDI type magneto ignition
Forced air
5.9 (1.56 US gal , 1.30 Imp gal)
1.1 (1.2 US qt , 1.0 Imp qt)
553 553 346 mm
(21.8 21.8 13.6 in)
42.8 kg (94.4 lbs)
4-stroke, overhead camshaft, single
cylinder
438 cm (26.7 cu-in)
[88.0 72.1 mm (3.46 2.84 in)]
29.8 N·m (3.04 kgf·m, 22.0 lbf·ft)
at 2,500 rpm
1.1 (1.2 US qt , 1.0 Imp qt)
Forced air
CDI type magneto ignition
Counterclockwise
The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final machine
will vary depending on numerous factors, including the
operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
9.5 kW (12.9 PS, 12.7 bhp)
at 3,600 rpm
29.8 N·m (3.04 kgf·m, 22.0 lbf·ft)
at 2,500 rpm
9.5 kW (12.9 PS, 12.7 bhp)
at 3,600 rpm
Length Width
Height
Dry mass [weight]
Engine type
Displacement
[Bore
Stroke]
Net power
Max. Net torque
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
Length Width
Height
Dry mass [weight]
Engine type
Displacement
[Bore
Stroke]
Net power
Max. Net torque
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
(in accordance with SAE J1349 )
(in accordance with SAE J1349 )
(in accordance with SAE J1349 )
(in accordance with SAE J1349 )
07/06/21 11:48:07 32Z3S600_018